Server Settings

This article gives a general overview of our server settings for devices that may require them (printers, copiers, scanners) as well as provide general guidance. Alternatively, you can log into https://help.emailsrvr.com/ for specific instructions.

If the device you're trying to setup is requesting a username, you will find it below.


User Settings:
Email Address test@mydomain.com
Username test@mydomain.com
Incoming Servers:

If the device you're trying to setup is requesting an incoming or IMAP server, you should use the settings below. We strongly recommend using IMAP (SSL) whenever possible.

Type Server Address Port
IMAP Server (SSL) (Recommended) secure.emailsrvr.com 993
IMAP Server (Non-SSL) imap.emailsrvr.com 143
POP Server (SSL) secure.emailsrvr.com 995
POP Server (Non-SSL) pop.emailsrvr.com 110
Outgoing Servers:

If the device you're trying to setup is requesting an outgoing or SMTP server, you should use the settings below. We strongly recommend using SMTP (SSL) whenever possible.

Please note: Our SMTP servers require authentication. Which means you need to enter username and password to send through our network. We do not allow unauthenticated open relays to send through our servers. If your device does not support SMTP Authentication, you will not be able to use our settings. Please consult with the device manufacturer on wether your device supports SMTP authentication.

Type Server Address Port
SMTP Server (SSL) secure.emailsrvr.com 465
SMTP Server (Non-SSL) smtp.emailsrvr.com 25, 587, 8025, 2525
*For non-SSL SMTP, you can use any of the ports listed. Some networks block port 25, which is why we provide the alternate ports.